STL MetroLink: Terminal 1 vs. Terminal 2, Rates and Downtown Trains
Traveler Intelligence · St. Louis Lambert International Airport · Reviewed October 9, 2026
STL’s airport has two MetroLink stations—not one universal boarding area. The Red Line serves Lambert Airport Terminal 1 and Lambert Airport Terminal 2 before continuing toward St. Louis. Choose the station serving the terminal where you actually arrive or check in. The train runs on the public side of the airport; it does not move passengers between secure airline gates.
1. Terminal 1 or Terminal 2: decide before leaving baggage claim
St. Louis Lambert’s two terminal buildings each have a separate MetroLink airport station. Metro Transit identifies them individually as Lambert Airport Terminal 1 and Lambert Airport Terminal 2. Your operating airline and actual arrival terminal—not a codeshare description—determine where you should follow public-side rail signs.
For an arrival, finish baggage collection first, then look for the station signs serving your terminal. The Terminal 1 MetroLink access is elevated near the terminal-side corridor. The Terminal 2 MetroLink access connects with the public garage and terminal area. Both are outside security and have signed elevator/escalator routes. Confirm the latest path and any temporary construction or access restrictions at the terminal before assuming an older photo shows the precise current entrance.
2. Why the two airport stations have different departure minutes
The Red Line travels between the two airport terminals before heading east through the St. Louis region. That is why Metro Transit’s published timetable gives one station’s departure a few minutes before the other, not one airport-wide departure time. A passenger at Terminal 2 should consult its own stop timetable rather than copy a Terminal 1 departure and arrive on the wrong platform.
For the official schedule effective September 14 through November 29, 2026, Metro lists typical weekday eastbound departures from Terminal 1 around :16, :36 and :56, beginning with a 4:56 a.m. departure; the corresponding Terminal 2 station typically lists :18, :38 and :58, beginning around 4:58 a.m. These minute markers are date-specific examples, not guarantees for every holiday, service interruption or late-night trip.
3. Red Line to downtown, the Arch area or a central hotel
Eastbound MetroLink Red Line service passes stations used for major St. Louis destinations, including Delmar Loop, Central West End, Cortex, Grand, Union Station, Civic Center, Stadium, 8th & Pine, Convention Center and Laclede’s Landing, before continuing farther east on applicable trips. Choose the actual downtown stop closest to your hotel, meeting venue or attraction rather than assuming that “downtown” refers to a single station.
Metro Transit publishes a system timetable showing which trains continue toward Shiloh-Scott and which late services have shorter turnbacks. A station name such as Union Station does not itself guarantee that Amtrak, intercity buses or a particular hotel are reached without an additional walk and station exit. Plan the final pedestrian or vehicle leg around baggage and accessibility.
4. Changing to the Blue Line or a MetroBus route
MetroLink also has a separate Blue Line, with services between the Shrewsbury area and Fairview Heights. Riders coming from the airport on the Red Line who need a Blue Line destination should check the current transfer at Forest Park–DeBaliviere and the direction shown on the platform. The two colored lines are not interchangeable for every route.
For MetroBus connections, use Metro Transit’s journey planner to confirm where to change, which stop is served and whether the fare permits the intended transfer. The public-rail journey is not a shuttle that runs to every downtown address or suburban hotel. If multiple transit legs would add a difficult walk with luggage, consider another authorized ground option after estimating the true door-to-door time.
5. Current MetroLink rates and fare validation
Metro Transit’s current fare schedule lists $2.50 for a regular rail cash base fare, $1.25 for an eligible reduced-fare rail trip, and $5 for a one-day bus/rail pass. Reduced rates require Metro’s qualifying permit. These are rail-transit rates, not Member Valet service rates, and they can change independently of the airport or airline.
The operator’s Fares & Passes page describes its ongoing next-generation fare-system rollout, Transit app ticket QR codes and validators. Confirm the ticket or pass you need for your specific route and the current validation procedure before boarding. If a rider needs a discounted fare, check eligibility beforehand instead of assuming that carrying a passport or airline ticket is enough.
6. Last airport trains and late-night short turns
Metro’s published fall 2026 station timetable includes late-night departures that terminate at Fairview Heights, Emerson Park or Civic Center rather than continuing all the way to the normal eastern endpoint. The current schedule, not the simple Red Line name, decides whether the service reaches your chosen stop and whether the next connection is available.
A delayed flight arriving after the final useful rail trip may make a taxi or separately booked vehicle more practical. Travelers with checked baggage must add landing, baggage claim and station access time before choosing a departure. Likewise, an early outbound flight requires verifying the first available train *toward* Lambert Airport and retaining enough time for airline check-in and TSA after getting off the train.
7. Accessible station routes and the airport’s elevator contingency
Metro Transit identifies elevators at both Lambert Airport stations, but notes that these particular elevators are managed and maintained by the airport. Its published accessibility contingency instructs travelers who cannot use an airport terminal station elevator to use the other terminal’s working elevator, with the airport’s interterminal shuttle connection where applicable.
The operator’s elevator assistance page gives the specific fallback using Exit 12 at the affected terminal to reach the other terminal by shuttle. This is a **contingency**, not a claim that either elevator is currently out of service. Travelers should verify real-time accessibility with the airport and Metro Transit, especially when the journey involves a wheelchair, stroller, large suitcase or additional transfer elevator later in the trip.
8. Luggage, safety, station access and the public side
MetroLink can be a useful airport connection for travelers carrying manageable luggage, but it is a public regional train rather than an airline baggage-transfer system. Keep bags under control without blocking doors or designated accessibility spaces. Leave enough time to get from the actual baggage carousel to the station before buying or validating a fare.
The airport terminals’ public side has different exits and pickup zones for private cars, taxis, shuttles and trains. Someone meeting your flight should not assume the rail station is the authorized location for their vehicle to wait. Confirm the passenger’s actual terminal, baggage readiness and the appropriate roadway or garage meeting area before a pickup vehicle begins its approach.
9. MetroLink stations are not long-term airport parking facilities
Metro Transit’s station-address directory lists the airport Terminal 1 and Terminal 2 MetroLink stations with no Park & Ride spaces at those stops. Travelers cannot treat a train platform as a free multi-day parking solution simply because the airport has public garages nearby. An airport parking reservation or an authorized off-airport facility has its own separate location and rules.
For a return flight, plan the sequence all the way through: the last city or suburban transfer, Red Line toward the correct Lambert terminal station, the elevator or station exit, the actual airline ticket desk, baggage drop and screening. If your flight uses the other terminal, do not assume the same MetroLink station entrance is the quickest or correct end of the airport to reach.
10. Four practical STL airport rail decisions
Terminal 1 passenger: collect bags, follow Terminal 1 MetroLink signs and use the current Terminal 1 Red Line timetable.
Terminal 2 passenger: stay oriented to Terminal 2, and use the separate Terminal 2 station departure times rather than Terminal 1’s minutes.
Blue Line destination: confirm the correct transfer at Forest Park–DeBaliviere and plan for the next platform, baggage and wait.
Late arrival or inaccessible station route: inspect the actual last useful train and Metro’s official terminal-elevator/shuttle contingency before committing to transit.
STL MetroLink FAQs
Does MetroLink serve both STL terminals? Yes. The Red Line has distinct Terminal 1 and Terminal 2 airport stops, with separate posted departure times.
Can I use MetroLink to move between gates without screening? No. It is a public-side regional transit system and does not replace airline secure-area connections or TSA screening.
Does a $5 day pass include Member Valet airport service? No. That is Metro Transit’s public bus/rail fare; it does not purchase Member Valet services.
What should a wheelchair user do if an airport-station lift is unavailable? Metro Transit publishes an airport shuttle workaround via Exit 12 and the other terminal’s station elevator. Confirm current conditions and staff assistance.
Member Valet service status at STL
Member Valet is not currently operating at St. Louis Lambert International Airport. We publish independent premium traveler ground-logistics information for planning purposes; Metro Transit, Lambert Airport and public transport operators are separate institutions. Newark Liberty (EWR) remains Member Valet’s primary live airport operation. This guide does not indicate a local STL valet attendant or a partnership with the rail operator.
Organizations coordinating frequent travel may review Corporate Membership; individuals can explore Membership. Priority Access records interest in possible future STL ground services and is not a reservation, local staff confirmation or guaranteed service activation. Any actual operating-market booking must be independently verified through Member Valet’s authorized system.
Related Traveler Intelligence
Read the St. Louis Lambert airport information hub for airport-wide orientation, the national airport traveler directory for other markets, and the cruise-port directory when connecting onward to a sailing. An information page does not establish operating-market availability.
Official sources reviewed October 9, 2026
Metro Transit — Terminal 1 published departures and current schedule date range
Metro Transit — Terminal 2 departures and shortened late-night routes
Metro Transit — Red Line and Blue Line system schedule
Metro Transit — public rail rates, passes and fare validation
Metro Transit — airport-station elevator access and shuttle contingency
Hero-image credit: MetroLink Terminal 1 station access at St. Louis Lambert, photographed April 27, 2025. Photo: Lightmetro / Wikimedia Commons. CC BY-SA 4.0. Archival station context; current boarding platforms, signage and schedules should be confirmed.
The cited rail timetable is effective September 14–November 29, 2026. Verify live stations, fares, late-night turnbacks and accessibility notices on the actual travel day. This is independent traveler guidance; Member Valet is not operating at STL.
